Table of Contents
Advertisement
INSTALLATION
Connecting the LED strips to the Smart Hub:
5. Connect the LED strips to the Smart Hub.
Make sure the weatherproof 3 pin connectors
are securely fastened and route cables away
from engine. The connectors are directional,
make sure to connect to the correct position
and fasten each end of the cap.
Installing the Smart Hub:
6. Secure the Smart Hub away from the car
engine or any moving components. Make sure
to avoid placing the Smart Hub or cables near
any extremely HOT location or next to the car
engine. Use 3M™ double-sided tape to secure
to any flat location and use Cable Ties to tie all
wiring away from all moving components.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the Formula DRIFT PSL PRO Series and is the answer not in the manual?