LAUNCH TECH X-431 HTT Manual page 3

Important Safety Precautions
Important: To avoid personal injury, property damage, or accidental damage to
the product, read all of the information in this section before using the product.
 Never collide, throw, or puncture X-431 HTT, and avoid falling, extruding and
bending it.
 Do not insert foreign objects into or place heavy objects on your device.
Sensitive components inside might cause damage.
 Do not use X-431 HTT in exceptionally cold or hot, dusty, damp or dry
environments.
 In places using X-431 HTT may cause interference or generate a potential
risk, please turn it off.
 X-431 HTT is a sealed unit. There are no end-user serviceable parts inside.
All internal repairs must be done by an authorized repair facility or qualified
technician. If there is any inquiry, please contact the dealer.
 Never place X-431 HTT into apparatus with strong electromagnetic field.
 Keep X-431 HTT far away from magnetic devices because its radiations can
damage the screen and erase the data stored on X-431 HTT.
 DANGER: Do not attempt to replace the internal rechargeable lithium battery.
Contact the dealer for factory replacement.
 CAUTION: Please use the included battery and charger. Risk of explosion if
the battery is replaced with an incorrect type.
Precautions on Using X-431 HTT
Before using this test equipment, please read the following safety information
carefully.
 Always perform automotive testing in a safe environment.
 Wear an ANSI-approved eye shield when testing or repairing vehicles.
 The vehicle shall be tested in a well-ventilated work area, as engines produce
various poisonous compounds (hydrocarbon, carbon monoxide, nitrogen
oxides, etc.)
 Do not connect or disconnect any test equipment while the ignition is on or
the engine is running.
 Put blocks in front of the drive wheels and never leave the vehicle unattended
while testing.
X-431 HTT Professional Automotive Diagnosis Handset
iii