Display Symbols; Instructions For Use - Proactive alevia Instructions Manual

DISPLAY SYMBOLS

Treatment mode
Low
battery
Pulse
rate
Pulse
width
Memory
Timer
Channel 1
output
intensity
Therapy Channel 2
site output
selector intensity
7
1. Insert the battery
Slide the belt clip off, then the battery
compartment cover. Insert a 9V battery
(included), matching the positive
Program and negative ends of the battery
(EMS)
to the markings, then close the compartment.
2. Connect electrodes to lead wires
Time Insert the lead wire connector into
remaining
the electrodes connector, ensuring
that no bare metal remains exposed.
3. Connect lead wires to the device
This device has 2 output channels,
which can be used simultaneously
(with 2 electrode pairs) or individually
(1 channel with 1 electrode pair). After
making sure that the device is turned
off, insert the wire plugs into the sockets
at the top of the unit.
Caution: Always use the lead wires
supplied with this unit.
4. Place electrodes on skin
Ensure that the skin surface where the electrodes will be placed is
clean and dry. Apply electrodes to the exact site indicated by your
physician. The electrodes should be placed firmly and evenly on the
skin to ensure good contact.

INSTRUCTIONS FOR USE

8