Advertisement
PHASE 2 – INSTALLATION
2.1 MOUNTING TRACKS INSTALLATION
2.1.1 • Remove existing plugs from vehicle roof holes.
• Apply a bead of silicone around each hole, then install the mounting tracks to the roof.
NOTE: The ends of the mounting tracks with the half-circles go to the rear of the vehicle.
REAR
For technical support, contact us at 1-800-565-5321
TOOLS
q Cordless Impact
q 10mm Socket
HARDWARE USED
10×
#90-825 Hex Bolt M6 × 20mm
#98-119 Lock Washer
#98-113 Flat Washer
#98-149 Neoprene Spacer
1525-PCX Installation Guide | REV. B2 | Page 15
Advertisement
