Filter function
only models:
EMS 300-3
EMS 3000-2
EMS 6K0.1
EMS 12K0.1
AF
(example)
EMS-BA-e-1716
This menu item allows the balance to be set according to
specific ambient conditions and measuring purposes.
In weighing mode keep the UNIT key pressed until [AF]
appears.
Press the MODE/CAL button several times until „StAbiL" is
displayed.
Acknowledge using SET-M key, the current setting is
displayed.
Select the desired settings by pressing the MODE/CAL
button.
1
Filter 1:
The balance reacts quickly and in a sensitive manner, quiet set-
up location.
2
Filter 2:
The balance reacts normally, normal installation site
3
Filter 3:
The balance reacts slowly and in a robust manner, busy set-up
location
Use the SET-M key to confirm selection.
27