Commissioning; Operation; Maintenance And Repair; Decommissioning - Bosch Rexroth NK350 Manual

28/96 Bosch Rexroth AG
7

Commissioning

CAUTION
Risk of damage to persons
and property!
Commissioning the NK350/
NK350S network coupler
requires basic mechanical and
electrical knowledge.
y Only qualified personnel (see
"Personnel qualifications" on
page 19) are authorized to
commission the system.
y Once the device has been
switched off, it cannot be
switched back on again until at
least 30 seconds have
elapsed.
Before commissioning, check that all plug-in
connections are firmly fitted.
8

Operation

Operation is not necessary while the system is
running.
NK350 / NK350S | 3 609 929 B69/2008-11
9 Maintenance and
repair
Cleaning and care
CAUTION
Any dirt or liquids penetrating
the device lead to
malfunctions!
Safe function of the NK350/
NK350S network coupler is no
longer ensured.
y Always provide for absolute
cleanness when working on
the NK350/NK350S network
coupler.
Maintenance
The NK350/NK350S network coupler is
maintenance-free if used as intended.
Spare parts
Please refer to the address directory under
www.boschrexroth.com and in chapter
"16 Service and sales" on page 32 for the
addresses of our foreign subsidiaries.
10

Decommissioning

For details about how to disassemble or
replace the NK350/NK350S network
coupler please refer to chapter 11
"Disassembly and replacement" on page 29.