Table of Contents
Advertisement
When the Qi-Series power is turned on and the liquid level is too low, the
following screen will display.
The level sensor can be disabled for specialist cleaning applications where
deionised (DI) water is used (see page 20).
When the bath is filled with liquid to the correct level, you will be given the
option to degas. (The need for de-gassing is explained on page 26).
You will need to de-gas the liquid to ensure good cleaning efficacy.
By choosing YES, your Qi-Series ultrasonic bath will run an automatic de-gas
cycle. The following screen will display.
When you are happy that the liquid is degassed, press the key.
Note: If the machine detects low liquid level for more than 5 seconds, it is
assumed that the bath has been filled with fresh water, and you will be given
the option of running a degas cycle.
Qi Operating Manual
10
C6027205
Advertisement
Table of Contents
