Scope Of Application - FineTek SIS Operation Manual

5. Scope of Application

Scope

The product is designed based on food grade structure and materials, ideal for food
and health areas.

Suitable for level detection of water-based medium, oil-based medium, powder or
sticky material as a switch output.

Can be used for liquid with separate layers (such as bubbles) and two-level or interface
detection (such as oil + water).

Can be used for almost all media; low specific gravity, low dielectric, non-conductive
media can all work properly.
Limitations

Not suitable for bulk solid or rough material (such as quartz sand).

Not suitable for highly corrosive media (strong acids and strong alkaline). Please check
the compatibility with the product material first.

Media with separate layers of different natures (such as oil on the water surface)
must be checked in advance.

Only explosion-proof type specifications can be used in dust explosion-proof
hazardous environments
 The sensor must be installed with the exclusive "Thread adapter" and its sealing
ring to ensure proper sealing
The special requirement used in the dust-explosion environment

If the connection is the metal tank or pipe, it must be grounded so the danger of static
electricity generated by friction or impact can be avoided.

If the connection is not the metal tank or pipe, the sensor must be installed with the
exclusive "Thread adapter" and use "thread adapter" to complete the grounding.

The cross-sectional area of the grounding wire must be greater than 4mm
(>11AWG). (Please refer to the installation instructions above)
7
2