fantastic furniture CODA INSERT 1 DOOR STANDARD Manual page 5

Step 1
You will need
2 x Cam Bolts Phillips head
(H3) screwdriver
Attach 2 x Cam Bolts (H3) into Back Panel (P3) using a Phillips head screwdriver.
Step 2
You will need
2 x Cam Nuts
2 x Dowels
(H4)
(H1)
Flat head
screwdriver
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 2 x Dowels (H1) into the holes of Back Panel (P3) as shown.
Insert 2 x Cam Nuts (H4) into the holes of Bottom Panel (P4).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Bottom Panel (P4) to Back Panel (P3),
then tighten the cam nuts using a Flat head screwdriver.
www.fantasticfurniture.com.au
H3
H3
(P3)
(P4)
H1
H4
H1
(P3)
H4
PAGE 5