Advertisement
Step 4
You will need
8 x CSK Screws
2 x T/MS Screws
38mm (H4)
2 x Rhinestone
Phillips Head
Handles (H7)
Screwdriver
H4
P6
H1
H2
Unlock
To attach panels (P7) & (P8) to panel (P6), insert 4 x CSK screws (H4) and tighten with
a phillips head screwdriver.
Slide in the drawer bottom panel (P10) into the grooves of panels (P7, P8 & P6) with the
laminated side facing up.
Attach the panel (P9) to panel (P7 & P8) and ensure the drawer bottom panel (P10) slides
into the groove.
Turn the cam nuts on panel (P7 & P8) clockwise with a phillips head screwdriver.
Attach the handle (H7) to panel (P9) with 1 x T/MS screw (H6) using a phillips head
screwdriver.
Repeat this process for the remaining drawer.
fantasticfurniture.com.au
(H6)
P8
P7
H4
H2
Lock
This is how a cam nut works........
Repeat x 2
P8
P6
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Laminated Side
P9
H6
P10
P7
H7
Page 7
Advertisement
