Advertisement
Step 11
You will need
2 x Washers
2 x Wall Fixing
Strap (H12)
(H13)
2 x CSK Screws
Phillips Head
16mm (H14)
Screwdriver
We strongly advise that
you use the wall safety
strap provided to prevent
the unit toppling over.
Attach wall fixing strap to panel (P1) with 2 x CSK screws (H14) and 2 x washers (H13) using
a phillips head screwdriver. There are pre-drilled holes on the bottom of panel (P1) to
insert the screws.
Move the bedside to the final position. Attach the safety strap to the wall.
Make sure it is firmly attached and make sure it is snug fit.
The screws and wall plugs are not provided. Please use appropriate fixtures for your
wall.
Seek advice from a qualified trades person on how to attach this safety
strap to your specific wall.
In the interest of our environment please dispose of all packaging
fantasticfurniture.com.au
P1
H13
H12
H14
Job Complete!
thoughtfully.
Pre-drilled
Hole
H12
P3
P1
H12
P2
Page 11
Advertisement
