fantastic furniture Seaforth Lowline 1240 mm Manual page 10

Step 6
You will need
6 x Cam nut
(H2)
Please make sure that
the PVC covered edge
is facing outwards
Put cam nut (H2) into the middle part, right and left sides (P4, P5 and P6),
rotate the cam nut, so that the arrow is facing towards the incomming cam bolts
(H1). Attach the middle part, right and left sides (P4, P5 and P6) to the top (P1),
by tightening the cam nut (H2) clockwise. Push the back panel (P2) into the
lowline frame.
www.fantasticfurniture.com.au
P6
H2
H2
P1
This is how a cam nut works........
P2
H2
P5
H2
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then turn
the cam nut so it
tightens over the bolt.
Please make sure that
the PVC covered side
is facing to the front
H2
P4
H2
PAGE 10
H3