7.
Timing chart
Image data outputs are transferred with USB bulk transfer. Timing numerical value below is
described by absolute prerequisite that camera can use transmission band without restriction of other
device. When there is other device on the same bus, the value described below is not guaranteed.
7.1
In Manual shutter mode (at all pixels readout)
Model Name
BU205M
BU406M/MN/MC
* If the value of T2 is not set by the application, it will be the same as T1.
Copyright © 2013 - 2018 TOSHIBA TELI CORPORATION, All rights reserved.
Image
T1 [ms]
T2 [ms]
5.9
Frame Rate setting
by the application.
11.1
27
Image
Default Frame Rate
[ms]
5.9
11.1
http://www.toshiba-teli.co.jp/en/index.htm
D4222901M