Table of Contents
Advertisement
5.12 GPIO
Selected signals are output from GPIO pins of I/O connector. Following signals are selectable.
Output signal is 5V CMOS.
TIMER0 ACTIVE
USER OUTPUT
EXPOSURE ACTIVE
FRAME ACTIVE
FRAME TRANSFER
FRAME TRIGGER WAIT
EXT_TRIG
Exposure
CMOS Transfer
USB Bus
TIMER0 ACTIVE
EXPOSURE
ACTIVE
FRAME ACTIVE
TRANSFER
FRAME TRIGGER
Copyright © 2013 - 2018 TOSHIBA TELI CORPORATION, All rights reserved.
: This signal can be used as strobe control signal.
The delay time and pulse width of this signal are configurable.
: Level selectable user output by register setting.
: Period from exposure start to end.
: Period from exposure start to the CMOS transfer completion.
: Period of transferring image data on USB bus.
: Indicating waiting a Random Trigger Shutter.
An External trigger is input during this period,
exposure starts immediately.
VD
FRAME
WAIT
Delay Duration
13
* ActiveLow
http://www.toshiba-teli.co.jp/en/index.htm
D4222901M
Advertisement
Table of Contents
