Table of Contents
Advertisement
6.6
GPIO Output signal specification
I/O Connector Pin No.
Output signal
Output level
Maximum Current
Polarity
Timer0 Active
Delay
Duration
TimerTriggerSource
6.7
Interface specification
Interface
Transmission speed
Protocol
Copyright © 2013 - 2018 TOSHIBA TELI CORPORATION, All rights reserved.
TIMER0 ACTIVE, USER OUTPUT, EXPOSURE ACTIVE,
FRAME ACTIVE, FRAME TRANSFER, FRAME TRIGGER WAIT
High active / Low active (factory setting : Low active)
0 to 2000000μs (factory setting : 0μs)
0 to 2000000μs (factory setting : 0μs)
Line0Active, ExposureStart, FrameTrigger
USB 3.0 (Only SuperSpeed is supported)
21
2 Pin : Line1
5V CMOS
+/-32mA
5Gbps (Maximum)
USB3 Vision
http://www.toshiba-teli.co.jp/en/index.htm
D4222901M
Advertisement
Table of Contents
