Timing Specification
Image data outputs are transferred with USB bulk transfer. Timing numerical value below is described by
absolute prerequisite that camera can use transmission band without restriction of other device. When there
is other device on the same bus, the value described below is not guaranteed.
● In normal shutter mode
Video format Mono 8, all pixels readout
Exposure
USB bus
Copyright © 2014 TOSHIBA TELI CORPORATION, All rights reserved.
Image
T1
T1 [ms]
T2 [ms]
Frame Rate setting
6.1
by the application.
* If the value of T2 is not set by the application, it will be the same as T1.
T2
Default Framerate [ms]
6.1
24 / 79
Image
D4235159A
http://www.toshiba-teli.co.jp/index.htm