Table of Contents
Advertisement
6.5
GPIO Input / Output signal specification
I/O Connector Pin No.
GPIO signal
Input / Output circuit
Input signal specification
Input level
Polarity
Pulse width
Input impedance
Output signal specification
Output signal
Output level
Maximum Current
Polarity
Timer0 Active
Delay
Duration
TimerTriggerSource
*1: In the factory setting, start up with UserSet1 (output setting).
Please note that loading other than UsetSet1 will change to input setting.
Note on Input Level:
- Line0 and Line2 have a different input level. Please use input level within the voltage described in this
specification.
Copyright © 2013 - 2018 TOSHIBA TELI CORPORATION, All rights reserved.
Input / Output (factory setting : Output*
Low: 0 to 0.5V, High: 4.0 to 5.0V
High active / Low active (factory setting : Low active)
TIMER0 ACTIVE, USER OUTPUT, EXPOSURE ACTIVE,
FRAME ACTIVE, FRAME TRANSFER, FRAME TRIGGER WAIT
High active / Low active (factory setting : Low active)
0 to 2000000μs (factory setting : 0μs)
0 to 2000000μs (factory setting : 0μs)
Line0Active, ExposureStart, FrameTrigger
20
1 Pin : Line2
50μs (minimum)
High impedance
5V CMOS
+/-32mA
http://www.toshiba-teli.co.jp/en/index.htm
1
)
D4222901M
Advertisement
Table of Contents
