Power Adapter Wall Mount Bracket (Optional) (Optional) Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance. Assembling the Phone Attach the stand, as shown below: Desk Mount Method Note: You can also mount the phone to a wall.
Page 3
Note: The USB ports can also be used to connect other USB devices, such as EXP43, USB headset and so on. Yealink recommends that you connect Bluetooth USB dongle or Wi-Fi USB dongle to the upper USB port and connect EXP43 to the lower USB port.
Page 4
PoE Hub/Switch Note: The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we recommend that you use the Ethernet cable provided by Yealink.
AireSpring Yealink Ultra-elegant Gigabit IP Phone SIP-T46U Startup After the IP phone is connected to the network and supplied with power, it automatically begins the initialization process. HTTP to the device with admin / admin logon, you can look up the IP address via Menu/ Status.
Page 6
AireSpring Yealink Ultra-elegant Gigabit IP Phone SIP-T46U Answering a Call Using the handset: Pick up the handset. Using the speakerphone: Press Using the headset: Press Note: You can reject an incoming call by pressing the Reject soft key. Ending a Call Using the handset: Hang up the handset or press the End Call soft key.
Page 7
AireSpring Yealink Ultra-elegant Gigabit IP Phone SIP-T46U To resume the call, do one of the following: or the Resume soft key. If there is only one call on hold, press If there is more than one call on hold, press to select the desired call, and or the Resume soft key.
AireSpring Yealink Ultra-elegant Gigabit IP Phone SIP-T46U Voice Message If the phone is registered to more than one line the Messages button will ask the user to select the line to connect to the voicemail system with via Message Center.
Page 9
AireSpring Yealink Ultra-elegant Gigabit IP Phone SIP-T46U To edit a contact: Press the Directory soft key when the phone is idle, and then select All Contacts. to select the desired contact, press the Option soft key and then Press select Detail from the prompt list.
Need help?
Do you have a question about the SIP-T46U and is the answer not in the manual?
Questions and answers