Yealink SIP-T46S Quick Reference Manual

Yealink SIP-T46S and T46U
Quick Reference Guide
PLACE CALLS
Using the handset
Dial the number you wish to call, then pick up the handset.
Note: You can also pick up the handset before dialing. However, the system completes
the call after a slight pause in entering digits on the dialpad.
Using the speakerphone
With the handset in the cradle, dial the number, then
press  or the Call soft key.
ANSWER CALLS
Using the handset
When a call comes in, pick up the handset.
Using the speakerphone
When a call comes in, press , the blinking line key, or
the Answer soft key.
Answer a second call
When a second call comes in, press the
Answer soft key or the blinking line key. The
active call automatically goes on hold.
HOLD AND RESUME CALLS
Place a call on hold
button or the Hold soft key during an active call. The controlling line key blinks.
Press the
Resume a held call
Press the blinking line key, the
Note: You may need to press  or  on the navigation dial to select the desired call to see the Resume soft
key.
For full user guides and video tutorials, visit Help.ENA.com and select UCaaS (formerly ENA SmartVoice).
Location of navigation
dial and volume control
button, or the Resume soft key.
varies by model
PHONE LAYOUT
Line keys
Line keys programmed to an extension
control inbound and outbound calls,
as well as indicate the status of the call
being managed.
Blinking green = incoming call or
•
call on hold
Solid green = active call
•
Line keys not programmed to an
extension may be configured as
speed dials, monitored extensions,
etc.
Soft keys
Soft keys display at the bottom of your
screen, and their functions change
based on your current activity.
Monitoring your soft keys greatly
benefits your phone usage. In nearly
all cases, the next action in your call
sequence will be displayed as a soft
key.
Buttons
Physical buttons always perform their
labeled function.