Canon CDI-E075-010 User Manual page 68

Using the Flash (continued)
When shooting with a high ISO sensitivity and using the built-in flash, there is more
of a chance of overexposure the closer you are to the subject.
• When shooting with [Slow Synchro] set to [On], we recommend the use of a
tripod to prevent camera shake.
• Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 208).
• The flash fires twice. A pre-flash will fire and will be followed by the main flash.
The pre-flash is used by the camera to obtain the subject's exposure data so that
the main flash can be set to the optimal intensity for the shot.
• The fastest shutter speed for flash synchronization is 1/250 second. The camera
automatically resets the shutter speed to 1/250 second if a faster speed is selected.
• The flash fires with automatic adjustments when [Flash Adjust] is set to [Auto] in
the [ (Rec.)] menu. When shooting in
[Manual], the flash fires fully or with the manually set adjustments.
• The built-in flash may take up to approximately 10 seconds to charge in some
cases. Actual times will vary according to usage and the battery charge.
• Shots cannot be taken while the flash is charging.
• The flash exposure and the Flash Output can be changed (p. 100).
• The flash setting is saved when the camera is turned off in the ,
shooting modes.
62
mode, or with [Flash Adjust] set to
, and