Canon CDI-E075-010 User Manual page 152

Print Settings (DPOF Print Settings) (continued)
3
Select images for printing.
Single Images
• When the print type (p. 147) is set to [Standard] or
[Both], select an image using the main dial or the B
or A arrow on the omni selector. You can set the
number of copies (up to 99) to be printed using the
C or D arrow on the omni selector.
• When the print type (p. 147) is set to [Index], select
an image using the main dial or the B or A arrow
on the omni selector and mark or remove marks
from images using the C or D arrow on the omni
selector.
• You can use the same procedures to select images in
index replay (3 images). Press the
switch between single replay and index replay.
All the Images on a CF Card
• Press the
images).
• You can set one copy of each image to print by
pressing the
using the C or D arrow on the omni selector, and
pressing the
• When the print type is set to [Standard] or
[Both], the setting for the number of print copies
can be changed for each image. When [Index] is
selected, the print settings can be deleted. For
the instructions on changing settings, please
reread Step 3 from the beginning.
• You can cancel all the settings by selecting [Clear all].
4
Press the
The selection mode will turn off and the Print Order menu will reappear.
146
button to switch to index replay (three
button, then selecting [Mark all]
button again.
button.
button to
Number of Copies