Canon CDI-E075-010 User Manual page 199

Problem
Subject in Subject too close
recorded
image is too
Subject bright in comparison
bright
to the background
Light shining directly on
subject or reflected off
subject into camera
Flash set to On.
A vertical bar of Subject is too bright.
light (red,
purple) appears
on the LCD
monitor
White dots or
Light from the flash has
white asterisks
reflected off dust particles or
appear on the
insects in the air. This occurs
image
more frequently in the
following conditions:
- When shooting at the wide-
angle end.
- When shooting with a high
aperture value in the
aperture-priority AE mode.
Flash set to Off.
Flash will not
fire
Image not Incorrect video system
showing on TV setting
Shooting mode set to
(Stitch Assist)
Zoom does not
Zoom lever was moved
operate.
while shooting in movie
mode.
CF card image
Currently used CF card has
reading is slow
been formatted in a
Recording
different device.
images on the
CF card takes
too long
Cause
Adjust the flash output with the flash exposure
compensation function (p. 100).
• Set the exposure compensation to a negative (-) setting.
• Use the AE lock or spot metering function.
See Locking the Exposure Setting (AE Lock) (p. 97) and
Switching between Light Metering Modes (p. 83)
Change the shooting angle.
Set the flash to Auto or Off.
This is a normal occurrence in devices containing CCDs and
does not constitute a malfunction. (This red bar of light will
not be recorded when shooting still photos, but it will be
recorded when shooting movies.)
This is a phenomenon that occurs with digital cameras and
does not constitute a malfunction.
Set the flash to Auto or On.
Set the video system to the appropriate setting, NTSC or
PAL, for your TV (p. 165).
The output will not appear on a TV monitor in
Assist) mode. Shoot in a different mode.
Operate the zoom before shooting in movie mode.
Use a CF card formatted with this camera.
See Formatting a CF Card (p. 131)
Solution
(Stitch
193