Canon CDI-E075-010 User Manual page 144

Connecting the Camera to a Printer (continued)
4
DIGITAL Terminal
To BJ Printer
Connection Cable
• appears on the camera LCD monitor and the
power/mode indicator is lit green when the
printer is properly connected to the camera.
When you detach the cable from the camera, hold the plug and do not pull by the
cable.
• On Bubble Jet printers with operation panels, images cannot be printed through
the operation panel while the camera is connected.
• The following operations cannot be performed while the printer is connected.
- Replaying movies
- Setting the language using the
• When the printer is disconnected, the
monitor and the camera will revert to standard replay mode.
• Please use the following procedures when you detach the cable from the printer
and the camera.
1. Detach the cable from the printer.
2. Turn off the camera power.
3. Detach the cable from the camera.
138
Connect the camera and printer using
the connection cable.
• When you insert the cable, make sure the
"Canon" logo on the connection cable faces
the back of the camera (LCD monitor side).
and the
or symbol will disappear from the LCD
button combination.