Using The Nd Filter - Canon CDI-E075-010 User Manual

Using the ND Filter

The brightness can be decreased by setting the ND filter on. This allows you to select
a smaller aperture and a slower shutter speed than usual.
1
Press the
2
Select [ND Filter] in the [
See Selecting Menus and Settings (p. 42).
3
Select [On] and press the
appears on the Display Panel.
Always use a tripod to prevent camera shake in this mode.
• Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 208).
• Standard brightness is decreased to approximately 1/8 when the ND filter is on.
For example, if the appropriate aperture value is 5.6, it becomes 2 when the ND
filter is on.
110
button to turn on the LCD monitor.
(Rec.)] menu.
also appears on the LCD monitor if it is on.
button.