Switching The Pc On And Off - Fujitsu Siemens SCENIC 600 Operating Manual

Preparation for use and operation

Switching the PC on and off

Switching the PC on and off
0
I
1
3
2
1 = Main switch 0 = System unit is switched off
2 = ON/OFF switch I = System unit is ready-to-operate
3 = Power-on indicator
System unit is off
The main switch (1) is in position 0, the power-on indicator (3) does not light, and the ON/OFF
switch (2) is disabled.
System unit is ready-to-operate
The main switch (1) is in position I and the power-on indicator (3) lights up orange or flashes
green/orange. In this mode, you can switch the system unit on with the ON/OFF switch (2). The
"ready-to-operate" status corresponds to the "stand-by" status of a TV set. The exact description of
the power-on indicator (3) is contained in the section "Indicators on the system unit".
System unit is on
The main switch (1) is in position I and the power-on indicator (3) lights up green. The system unit
can be switched ready-to-operate with the ON/OFF switch (2).
16
A26361-K520-Z100-4-7619