Installation; Incoming Acceptance, Transport, Storage; Installation Conditions - Endress+Hauser Oxymax COS22D Operating Instructions Manual

Oxymax COS22D
3

Installation

3.1

Incoming acceptance, transport, storage

► Make sure the packaging is undamaged!
► Inform the supplier about any damage to the packaging.
Keep the damaged packaging until the matter has been settled.
► Make sure the contents are undamaged!
► Inform the supplier about damage to the contents. Keep the damaged products until the matter has
been settled.
► Check that the order is complete and agrees with your shipping documents.
► The packaging material used to store or to transport the product must provide shock protection and
humidity protection. The original packaging offers the best protection. Also, keep to the approved
ambient conditions (see "Technical data").
► If you have any questions, please contact your supplier or your local sales center.
3.2

Installation conditions

3.2.1 Angle of installation
Not permissible!
Fig. 2: Permitted angle of installation
3.2.2 Mounting location
• Select the installation location so that there is easy access for later calibration.
• Make sure that upright posts and assemblies are secured safely and vibration-free.
• Select an installation location which produces a typical oxygen concentration.
Endress+Hauser
Permissible angle of installation
10° 10° Not permissible!
Installation
a0005584-en
9