Audio Volume Too Low; Configuring Peripherals Interfaces - Fujitsu Stylistic 2300 User Manual

Fujitsu stylistic 2300: user guide

Hide thumbs Also See for Stylistic 2300:

Table of Contents

Audio Volume Too Low

If the audio volume on your pen tablet speaker or external headphones is too low,

check the following:

• Ensure that the speaker (or headphone output if using headphones) is enabled. To

do so, tap the Speaker Mute hotpad. The system beeps when the speaker or

headphone output is turned on using the Speaker Mute hotpad.

• Ensure that the volume level set with the Volume hotpads is set to an audible

level.

• Ensure that the mute box in the system volume control (accessible from the

system tray) is not set.

• Ensure that any volume control in your audio software is set to an audible level.

Note that peripheral devices such as serial port A can be disabled during the BIOS

Setup. If the peripheral interface you want to use does not appear to be working with

your peripheral device, ensure that it is enabled in the BIOS. Contact your local help

desk or reseller if you need assistance using BIOS Setup.

3-10

Care and Maintenance

Table of Contents