Table of Contents
Advertisement
If You Have a Flat Tire
Installation
1. Position the wheel.
2. Position the wheel nuts so that the tapered sides face the wheel
rim (2).
3. Hand-tighten the wheel nuts on the wheel, then lower the ATV
to the ground before tightening the nuts in a crisscross (rather
than circular) pattern to the specified torque:
47 lbf·ft (64 N·m , 6.5 kgf·m)
If a torque wrench was not used for installation, see your dealer as
soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capability.
166
Taking Care of the Unexpected
Advertisement
Table of Contents
