Table of Contents
Advertisement
Emergency Wheel Removal/Installation
Refer to Safety Precautions on page 76.
(1)
(1) wheel nuts
Removal
1. Park your ATV on a firm, level surface.
2. Loosen — but do not remove — the wheel nuts (1).
3. Raise the front (or rear) wheels off the ground and place a
support block under the vehicle.
4. Remove the wheel nuts.
5. Remove the wheel.
• Avoid getting grease, oil, or dirt on the disc or pad surfaces
when removing and installing each wheel. Any contamination
can cause poor brake performance or rapid pad wear after
reassembly.
If You Have a Flat Tire
(1)
(2)
Taking Care of the Unexpected
(2) wheel rim
165
Advertisement
Table of Contents
