Honda Sportrax TRX250X 2019 Owner's Manual page 111

5. Remove the screw A (4) and stay (5).
6. Loosen the screw B (6) and remove the air cleaner assembly (7)
from the air cleaner housing.
7. Remove the clamp (8) and air cleaner (9) from the air cleaner
body (10).
8. Gently wash the air cleaner in clean, non-flammable (high flash
point) solvent such as kerosene — not gasoline. After cleaning,
gently squeeze out the remaining solvent. Avoid twisting or
wringing the air cleaner. This can tear the foam.
9. Inspect for tears or cracks in the foam or seams of the air cleaner.
Replace the air cleaner if it is damaged.
10. Allow the air cleaner to dry thoroughly before applying oil. A wet
air cleaner will not fully absorb the oil.
11. Pour clean Pro Honda Foam Filter Oil or an equivalent over the
entire surface of the air cleaner. Use both hands to evenly spread
the oil into the air cleaner. Gently squeeze out any excess oil. (To
keep your hands dry, place the air cleaner in a clean plastic bag
before spreading the oil into the air cleaner.)
UNDER SEAT
(4) screw A
(5) stay
(6) screw B
(7) air cleaner assembly
12. Install the air cleaner on the air cleaner body.
(6) (5)
(7)
Air Cleaner
(4) (10)
(8)
(8) clamp
(9) air cleaner
(10) air cleaner body
Servicing Your Honda
(5)
(9)
101