Table of Contents
Advertisement
5.4.3.3.1 SD Card
This tab allows the user to set the camera's response to an SD card related abnormality. Below is a screenshot of
the SD card tab screen:
Below is an explanation of the fields on the SD Card settings tab:
•
Event Type: This dropdown box allows the user to select which SD card abnormality to set event triggers for. The 3
options are No SD Card, SD Card Error, and Capacity Warning.
•
Enable: This checkbox enables the SD Card abnormality trigger for the camera.
•
Relay Out: This checkbox allows the user to enable the camera to trigger an alarm when an SD Card abnormality is
detected.
•
Alarm Delay: This field specifies in seconds how long the delay between alarm activation and relay alarm activation
should be.
•
Send Email: This checkbox allows the user to enable the camera to send an email when an SD Card abnormality is
detected.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
5.4.3.3.2 Network
This tab allows the user to set the camera's response to a Network related abnormality. Below is a screenshot of the
Network tab screen:
Advertisement
Table of Contents
Need help?
Do you have a question about the IP2M-851EW and is the answer not in the manual?