Table of Contents
Advertisement
installation and external connection
INSTALLING THE WALL MOUNT
Follow the instructions below to install the wall mount.
1.
Place the wall mount on the installation point and mark the 4 holes for the screws. Drill at least 4 of 6-32 holes.
2.
Drill a 1/2" hole on the center of the wall mount.
3.
Use 4 screws to fi x the template to an appropriate point.
4.
Arrange the cables through the center hole.
5.
Connect the cable and use one screw on the bottom of the wall mount to fi x it to the product.
J
Do not install the product on a metal wall. Otherwise, this will cause malfunction due to radio frequency interference
against the wall.
14_
Installation and External Connection
Advertisement
Table of Contents
