Table of Contents
Advertisement
Quick Links
Asha Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
dowel
screw
x2
x20
G
H
I
wheel
wedge
plastic
x 4
x4
glide
x5
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
C
D
bolt
locking
screw
x22
nut x22
J
K
handle
bolt
x4
x2
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
E
F
wheel
x4
x32
L
M
screw
double
ended
x4
screws
x1
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
screw
x2
x1
1
Advertisement
Table of Contents
Related Manuals for Mocka Asha Entertainment Unit
Summary of Contents for Mocka Asha Entertainment Unit
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Assembly Instructions Insert 8x bolts (C) into panel [1] and tighten with a screwdriver. Insert 8x bolts (C) into legs [4], [5], [6] and [7] and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 8x locking nuts (D). Tighten with a screwdriver. secure with 3x locking nuts (D). Tighten with a screwdriver. Insert 6x bolts (C) into panels [2] and legs [4], [5], [6] and [7] and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Attach panel [9] to panel [8] with 2x dowels (A) and secure with 3x locking nuts (D). Tighten with a screwdriver. secure with 2x screws (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach support leg [10] to panel [8] with 1x double ended screws (M), to form the back of the unit as shown. then hammer 5x plastic guides (I) onto legs [4], [5], [6] and [7] and support leg [10]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 32x screws (E). Tighten with a screwdriver. Attach 2x handles (J) to with 8x locking nuts (D). Tighten with a screwdriver. doors [3] and secure with 4x bolt (K). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Push the clip back up to lock into place. Attach 1x safety strap (V) to the top of the back side of the unit as shown using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 (V). Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and 1x wall screw (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Asha Entertainment Unit and is the answer not in the manual?
Questions and answers