Table of Contents
Advertisement
Quick Links
Asha Bedside Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
dowel
screw
bolt
x4
x24
x22
I
J
K
slide
wedge
screw
x4
rail x1
x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
F
locking
screw
slide
x10
nut x22
rail x1
L
M
N
plastic
small
small
glide
locking nut
bolt
x4
x4
x4
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
G
H
slide
slide
rail x1
rail x1
O
P
handle
bolt
x2
x1
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
screw
x2
x1
1
Advertisement
Table of Contents
Related Manuals for Mocka Asha Bedside Table
Summary of Contents for Mocka Asha Bedside Table
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Assembly Instructions Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. Insert 8x bolts (C) into legs [4], [5], [6] and [7] and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 8x dowels (A) and secure with 8x locking nuts (D). Tighten with a shown and secure with 6x screws (E). Tighten with a screwdriver. screwdriver. Insert 8x bolts (C) into panels [2] and [3]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Attach panel [3] to panel [8], [9] and [10] with 4x dowels (A) and secure and secure with 4x locking nuts (D). Tighten with a screwdriver. with 4x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Asha Bedside Table Assembly Instructions Attach 4x plastic glides (L) to the legs using a hammer as shown. Slide panel [11] down along the grooves between the panels [2] and [3]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 6x locking nuts (D). Tighten with a screwdriver. a screwdriver. Slide panel [15] along the grooves between the panels [13] and [14] to form the base of the drawer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Secure with 4x screws (E) and tighten with a screwdriver. Attach handle (O) to panel [12] and secure with 2x bolts (P) and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 1x washer (Z) and 1x screw (W). Tighten 1x wall screw (Y). Ensure unit is balanced and steady before with a screwdriver. use. You're done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Asha Bedside Table and is the answer not in the manual?
Questions and answers