Advertisement
Quick Links
Asha Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
screw
bolt
dowel
x14
x10
x20
I
J
K
slide
wedge
screw
rail x2
x4
x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
F
screw
locking
slide
x20
rail x2
nut x20
L
M
N
plastic
small
small
glide
locking nut
bolt
x4
x8
x8
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
G
H
slide
slide
rail x2
rail x2
O
P
handle
bolt
x4
x2
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
screw
x2
x1
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Asha Console Table
Summary of Contents for Mocka Asha Console Table
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Assembly Instructions Insert 8x bolts (C) into panel [1] and tighten with a screwdriver. Insert 8x bolts (C) into legs [4], [5], [6] and [7] and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 [7] to panel [3] and secure with 8x locking nuts (D). Tighten as shown and secure with 6x screws (E). Tighten with a screwdriver. with a screwdriver. Insert 4x bolts (C) into panels [2] and [3]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 3x screws (E). Flip the panel [11], attach 1x slide rail (F) with 2x locking nuts (D). Tighten with a screwdriver. to panel [11] as shown and secure with 3x screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach panel [11] to panel [9] and [10] and secure with 2x screws (B). Tighten with a screwdriver. secure with 2x locking nuts (D). Tighten with a screwdriver. Attach 4x plastic glides (L) to the legs using a hammer as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Attach panel [1] to the rest of the unit with 10x dowels (A) and and [3] to form the back of the unit as shown. secure with 8x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 [15] and [16] to form the base of the drawer. screws (E) and tighten with a screwdriver. Attach handle (O) to panel [13] / [14] and secure with 2x bolts (P) and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 4x screws (K). Tighten with a screwdriver. Attach 1x safety strap (V) to the top of the back side of the unit as shown using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 (V). Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and 1x wall screw (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Asha Console Table and is the answer not in the manual?
Questions and answers