Advertisement
Quick Links
Aspen Wardrobe
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
26 x
26 x
24 x
24 x
bolt
locking
dowel
long
nut
screw
I
CL
DL
CR
DR
2 x
2 x
L+R
L+R
4 x
slide rail
slide rail
handle
M
N
O
12 x
36 x
shelf
small
clothes hanger
6 x
plug
hinge
screw
support
HARDWARE SUPPLIED
Phillips & Flathead screwdrivers and hammer required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
mocka.co.nz I mocka.com.au
F
E
W
10 x
11 x
small
medium
2 x
screw
screw
safety
L
J
K
strap
X
4 x
4 x
long
16 x
2 x
nut
screw
wedge
wall
anchor
P
Q
R
4 x
8 x
small
4 x
screw
cover
washer
WARNING: Any furniture that is not anchored to a wall has the potential to
tip over in certain circumstances, i.e. if a child attempts to climb up on the
furniture or in the event of an earthpuake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a free safety wall anchor with
all furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from those
supplied.
2 x
long
screw
Y
2 x
screw
Z
2 x
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Aspen Wardrobe
Summary of Contents for Mocka Aspen Wardrobe
- Page 1 Aspen Wardrobe Thank you for your purchase. WARNING: Any furniture that is not anchored to a wall has the potential to Please follow the instructions below for correct assembly. tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthpuake.
- Page 2 Aspen Wardrobe Insert 2 x bolts (A) into panel [5]. Attach 4 x small screws (Q) to panel [5] Insert 3 x bolts (A) into panel [6]. Attach panel [11] to panel [6] with 4 x medium using 2 x clothes hager supports (P). Tighten with a screwdriver.
- Page 3 Aspen Wardrobe Attach 1 x left slide rail (CL) to panel [3] and secure with 3 x small screws (E). Attach 1 x right slide rail (CR) to panel [4] and secure with 3 x small screws (E). Insert 5 x bolts (A) into panel [3]. Attach 1 x clothes hager support (P) to panels Insert 7 x bolts (A) into panel [4].
- Page 4 Aspen Wardrobe Insert 4 x dowels (C) into panels [5] and [8]. Attach panel [8] to panel [6] and Insert 2 x dowels (C) into panel [7]. Attach panel [7] to panel [5] and aecure secure with 3 x locking nuts (B). Attach panel [5] to panel [6] and secure with with 2 x locking nuts (B).
- Page 5 Aspen Wardrobe Insert 2 x dowels (C) into panels [6]. Attach panels [6], [8] and [9] to panel [3] Insert 4 x dowels (C) into panels [6] and [7]. Attach panels [6], [7], [8] and [9] and secure with 5 x locking nuts (B). Tighten with a screwdriver.
- Page 6 Aspen Wardrobe Insert 6 x dowels (C) into panels [3], [4] and [5]. Attach panels [3], [4] and [5] to Slide panels [10] between the grooves on panels [3], [4] and [5] to form panel [1] and secure with 8 x long screws (D). Attach 2 x wall straps (W) to panel the back of the unit as shown.
- Page 7 Aspen Wardrobe Insert 6 x dowels (C) into panels [3], [4] and [8]. Attach panels [2] to panel [3], [4]and [8] and secure with 6 x long screws (D) and 3 x locking nuts (B). Tighten Insert 3 x bolts (A) into panel [2]. Tighten with a screwdriver.
- Page 8 Aspen Wardrobe Attach panels [12] to panel [2] and secure with 8 x long screws (D). Insert 4 x nuts (K) into panels [12]. Attach panels [13] to panels [12] and secure Tighten with a screwdriver. with 4 x screws (L). Tighten with a screwdriver.
- Page 9 Aspen Wardrobe Door x 2 Attach panels [17], [18] and [20] to panel [19], secure with 6 x medium screws (F). Attach 6 x hinges (M) to panels [14] and secure with 12 x small screws (N). Tighten with a screwdriver.
- Page 10 Aspen Wardrobe Slide panels [21] between the grooves on panels [17], [18] and [19] to form the Insert 6 x bolts (A) into panels [16]. Tighten with a screwdriver. base of the drawer as show. mocka.co.nz I mocka.com.au...
- Page 11 Aspen Wardrobe Attach panels [17], [18] and [20] to panels [16], secure with 6 x locking nuts (B). Attach 2 x slide rails (DL) and (DR) to panels [17] and [18], secure with 4 x small Cover locking nuts (B) with 4 x covers (R). Tighten with a screwdriver.
- Page 12 Aspen Wardrobe NOTE: If the doors are uneven or there is a gap in the middle, loosen or tighten the screw on the hinge until they are sitting flush. Attach panels [14] to panels as shown. Secure with 24 x screws (N). Insert 2 x handles Attach 12 x shelf plugs (O) to panels [3], [4] and [5].
- Page 13 Aspen Wardrobe Attached panels [15] to clothes hager supports (P) as shown. Insert 16 x wedges (J) to panels [10]. Attach 1 x medium screw (F) into panels [5] and [9]. Tighten with a screwdriver. mocka.co.nz I mocka.com.au...
- Page 14 Aspen Wardrobe Strap Washer Wall anchor Wall screw Wall screw Wall screw Once assembled lift furniture into place, do not drag. Use a drill to create a small hole lining up with the top of the safety stap (W). Fasten to wall using wall anchor (X), washer (Z) and screw.
Need help?
Do you have a question about the Aspen Wardrobe and is the answer not in the manual?
Questions and answers