Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Mocka Manuals
  4. Indoor Furnishing
  5. Mischa Three Drawer
  6. Assembly instructions manual

Mocka Mischa Three Drawer Assembly Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Mischa Three Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
dowel
screw
bolt
x15
x12
x29
I
H
J
slide rail
slide rail
small bolt
x3
x3
x16
O
P
handle
felt
leg bracket
x3
pad x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
small
slide rail
locking
screw x30
nut x29
K
L
wedge
screw
long screw
x8
x8
Q
R
S
Allen key
long bolt
x4
x1
x4
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
F
G
slide rail
safety
x3
x3
M
N
handle
x6
bolt x6
T
screw
x8
V
W
X
wall
screw
anchor
screw
strap
x1
x1
x1
Wall Strap
Y
Z
wall
washer
x2
x1
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Mischa Three Drawer and is the answer not in the manual?

Questions and answers

Related Manuals for Mocka Mischa Three Drawer

Summary of Contents for Mocka Mischa Three Drawer

  • Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 2 Insert 10x bolts (C) into panels [3] and [4]. Tighten with a screwdriver. Attach 3x slide rails (G) to panel [4] and secure with 9x small screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 3 Attach panels [4] to [5], [6], [7] and [8] and secure with 5x locking nuts (D) and 2x dowels (A). Tighten with a screwdriver. 5x locking nuts (D) and 2x dowels (A). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 4 Attach panel [2] to the rest of the unit using 4x dowels (A). form the back of the unit. Secure with 4x long screws (M) and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 5 (S). Tighten with a screwdriver and an Allen key (R). Attach each leg [10] to panel [2] using 4x small bolts (J) as shown. Tighten with the Allen key (R). Attach 4x felt pads (P) to the ends of the legs. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 6 Attach panel [1] to panels [3], [4] and [5] and secure with 4x locking nuts (D) and 4x dowels (A).Tighten with a screwdriver. Attach panel [5] to panel [1] and secure with 2x long screws (M). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 7 Insert 5x bolts (C) to panel [11].Tighten with a screwdriver. Attach panels [12], [13] and [14] to panel [11] and secure with 5x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 8 Drawer x3 Slide panel [15] down along the grooves of panels [12] and [13]. Attach panel [12], [13] and [16] as shown using 5x screws (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 9 Attach 1x handle (O) to panel [11] and secure with 2x handle bolts (N). as shown. Secure with 4x screws (E) and tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 10 8x screws (L). Tighten with a screwdriver.Attach 1x safety strap (V) to the top of the back side of the unit as shown using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 11 (V). Fasten to wall using 1x washer (Z), 1x wall anchor (X) and 1x screw (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...