Advertisement
Milton Small Plant Stand
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
bolt
x16
C
Allen Key
x 1
Hardware Supplied
Phillips screwdrivers
required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
V
B
safety
strap x1
screw
x17
X
D
wall
anchor
x1
bolt
x4
washer
Wall Strap
W
screw
x1
Y
wall
screw
x1
Z
x2
Maximum weight limit per shelf is 10kg
Indoor Use Only
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mocka Milton Small Plant Stand
Summary of Contents for Mocka Milton Small Plant Stand
- Page 1 The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 Milton Small Plant Stand Assembly Instructions Panel Layout mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Attach panel [2] and [3] to panel [1] and secure with 5x screws (B). Tighten with a screwdriver. Attach 1x safety strap (V) and 1x washer (Z) to panel [2] and secure with 1x screw (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Attach panels [6] and [7] to panel [1] and secure with 6x screws (B). Attach panels [8] to panels [2] and [3] and secure with 2x bolts (D) as shown. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach panels [4] and [5] to panels [8] and secure with 2x bolts(A). Attach panels [8] to panels [4] and [5] and secure with 2x bolts (D) as shown. Tighten with an Allen Key (C). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Attach panels [6] and [7] to panels [8] and secure with 2x bolts(A). Attach panel [9] to panesl [1] and secure with 6x bolts(A). Tighten with an Allen Key (C). Tighten with an Allen Key (C). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Attach panel [9] to panels [1] and secure with 6x bolts(A). using 1x washer (Z), 1x wall anchor (X) and 1x screw (Y). Ensure unit is Tighten with an Allen Key (C). balanced and steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Milton Small Plant Stand and is the answer not in the manual?
Questions and answers