Yamaha CRX-E200 Service Manual page 38

(4)POWER OFF processing (except receiver)
When the power is turned off at a unit other than the receiver, the unit informs the receiver of the status when the power off
processing has been completed.
RX
(5)FUNCTION selection
When the RX function is selected, the unit in the PLAY mode will be stopped.
RX
FUNCTION selection
[FUNC_CD]
or [FUNC_MD]
or [FUNC_TAPE]
or [FUNC_TU]
or [FUNC_AUX]
Stop when FUNC≠ CD
and in PLAY mode
(6)AUTO FUNCTION
When each unit is set to the PLAY mode, the receiver selects the function to be suitable for that.
RX
When FUNC≠ PLAY
FUNCTION selection
[FUNC_CD]
or [FUNC_MD]
or [FUNC_TAPE]
or [FUNC_TU]
or [FUNC_AUX]
Stop when FUNC≠ CD
and in PLAY mode
CDX MDX
POWER OFF
After POWER OFF processing
Secondary connection state
[STATE_OFF]
CDX MDX
Stop when FUNC≠ MD
and in PLAY mode
[STOP] [STOP]
CDX MDX
PLAY START PLAY START
[PLAY] [PLAY]
Stop when FUNC≠ MD
and in PLAY mode
[STOP] [STOP]
KX Remarks
The receiver detects
the units being
connected when
informed of the
secondary
connection state.
KX
Remarks
When MD or TAPE is
in RECORD mode, or
in EDIT mode, it is
prohibited to select
functions.
Stop when FUNC≠ TAPE
and in PLAY mede
[STOP]
KX
Remarks
PLAY START
[PLAY]
Same function as
(5) FUNCTION
Stop when FUNC≠ TAPE
selection.
and in PLAY mode
[STOP]
RX-E200
43