Important Safety Instructions - Loewe klang mr1 Comprehensive User's Manual

Hide thumbs Also See for klang mr1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
Loewe klang mr1, klang mr3, klang mr5

Important safety instructions

1
Important safety
instructions
Attention: Read this page carefully to
ensure safe operation of the device.
Follow all safety and operating instruc-
tions when using this product.
You should keep the safety and oper-
ating instructions for future reference.
You should strictly follow all warnings
provided on the product and listed in
the operating instructions.
Explanation of symbols
Double Insulated (Class II) Equipment.
This electrical appliance has been de-
signed in such a way that it does not
require a safety connection to electrical
earth (ground).
This symbol indicates risks caused by
high voltages.
This symbol is to alert the user to other,
more specific risks.
This symbol indicates dangers caused
by the development of fire.
1.1
Installation
1.1.1
Placement
Place the unit on a stable, even surface.
Do not place this unit close to strong
magnetic fields.
To ensure optimum acoustic perfor-
mance and safe cable routing, please
place the unit at least 5 cm away from
the wall.
1.1.2 Cables
Lay the speaker and power cables in
such a way that they cannot be dam-
aged. The power cable may not be
kinked or laid over sharp edges, stood
on or exposed to chemicals. A power
cable with damaged insulation can
cause electric shocks and poses a fire
risk. As such, it must be changed before
the unit is used again
1.1.3 Do not use this device near
water
The device should never be exposed to
water droplets or water splashes, such
as those found near a bathtub, wash
basin, kitchen sink, washing machine,
wet basement or swimming pool. Never
place containers filled with liquids, such
as e.g. flower vases, on the device.
1.1.4 Ventilation
Slots and openings in the housing are
used to ventilate the device to ensure
reliable operation and to protect the
device from overheating. Install the de-
vice according to the manufacturer's in-
structions. Never block the ventilation
by placing the device on a bed, sofa,
rug, or similar soft surfaces. This device
should not be installed in a bookshelf
or built-in wardrobe unless adequate
ventilation is ensured.
1.1.5 Heat
Do not install the device near hot sur-
faces, such as radiators, fan heaters,
stoves or other devices that can be hot.
Never place objects with open flame,
such as candles or lanterns, on or near
the device.
1.1.6 Accessories
Use only the accessories specified by
the manufacturer.
1.2
Usage
1.2.1 Overload
Never overload mains sockets, exten-
sion cords or multiple sockets, oth-
erwise there is a risk of fire or electric
shock.
1.2.2 Thunderstorm
The device should be disconnected
from the mains during thunderstorms
and if it is not used for a long time.
1.2.3 Penetration of foreign material
and liquid
Be careful not to allow foreign material
or liquid to enter this device through
ventilation holes, otherwise it may come
into contact with high voltage compo-
nents or short circuit resulting in a fire
or electric shock. Never spill liquids of
any kind on this device.
1.2.4 Risks associated with high
volume
The device is not designed for listening
with headphones. To prevent possible
hearing damage, do not listen at high
volume for long periods.
1.2.5 Disconnection from power
supply
The power button does not disconnect
the power supply from the mains. To
completely disconnect the device from
the mains, unplug the mains cable from
the socket.
The mains plug must be easily accessi-
ble so that the unit can be disconnected
from the mains at any time.
1.3
Maintenance
1.3.1 Cleaning and care
Unplug the mains adapter of this device
from the mains socket before cleaning
this product. Clean the speakers with
a soft, moist, clean and colour-neutral
cloth only, without any aggressive or
scouring cleaning agents. Speaker grills
are textile covered. Due to electrostatic
charging, dust may accumulate on the
speaker cover. You can remove this by
carefully using a vacuum cleaner with a
soft brush attachment if required.
In case of dirt or stains:
Moisten a soft, colour-neutral cloth with
detergent or normal stain remover and
gently rub away the stain. You can also
treat the mark/stain directly with nor-
mal dry stain remover spray (vacuum
up powder). Do not moisten the fabric
cover directly with detergent or stain re-
mover (risk of encrustation). Do not use
any solvents to clean the fabric.
Follow the manufacturer's instructions
when using stain removers.
1.4
Repair
1.4.1 Damages requiring repair
Maintenance and repair work should
only be carried out by a qualified cus-
tomer service. Maintenance/repair is
required if the device has been dam-
aged, if liquid has entered the device,
if objects have entered the device, if
the device has been exposed to rain or
moisture, when it stops working prop-
erly or has fallen down.
1.4.2 To minimize the risk of electric
shock, fire, etc.
Do not remove screws, covers or body
parts.
EU Declaration of Conformity
Hereby, Loewe Technology GmbH declares
that the radio equipment type Loewe klang
mr complies with Directive 2014/53/EU. The
full text of the EU declaration of conformity
is available at the following Internet address:
https:/ /www.loewe.tv/int/support
This product can be used across all EU member
states.
Due to the 5 GHz frequency range of the built-in
WLAN module, use in the following countries is
only permitted inside buildings:
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Klang mr3Klang mr5

Table of Contents