Loewe Audiodesign Speaker 2go Manual

WELCOME

Loewe stands for the highest standards of technology, design and user friendliness. This applies equally for TV, video, audio and accessories. Neither technology nor design is an end in itself, but both are intended to provide our customers with the best possible audio and visual experience. Our design is not influenced by short-term, fashionable trends. You have, after all, purchased a high-quality piece of equipment that you do not want to be tired of tomorrow or the day after.

Delivery specification

• Speaker 2go
• Power adaptor
• Audio cable, 3.5 mm jack
• Carrying bag
• This instruction manual

About this instruction manual

The information in these instructions refer to the product Loewe Speaker 2go (part no. 52231xxx).
For best results regarding safety and the longevity of the set, we recommend you read the chapter "For your safety" before switching it on for the first time.

Performance

Connection options
Bluetooth 2.1 + EDR
Connectivity Easy Pairing (for connection with NFC-enabled devices)
USB charging function for external devices
Socket for power adaptor
AUX IN stereo audio input 3.5mm jack

Replay functions
Playing audio files (aptX, SBC)
Bluetooth handsfree equipment

For your safety

For your safety, and to avoid unnecessary damage to your unit, please read and follow the safety instructions below:
Intended use and ambient conditions
This device is intended exclusively for rendering audio signals. It must not be used in rooms with a high level of humidity (e.g. bathroom, sauna) or a high dust concentration. The manufacturer's warranty is only valid for use in the specified permissible environment.
If the unit is used outdoors, make sure that it is protected from moisture (rain, dripping water and splashing water or dew). High humidity and dust concentrations lead to leakage currents in the device. This can result in a shock hazard by touching it or even fire.
If you have moved the unit out of the cold into a warm environment, leave it switched off for about an hour because of a possible formation of condensation.
Do not place objects containing liquids on top of the unit. Protect the device against dripping and splashing water. Candles or naked flames must be kept away from the unit at all times to prevent it from catching fire.
Never place the device in a location where it is exposed to vibrations. This can lead to material overload.

Power supply
Incorrect voltages can damage the unit. This device may only be connected to a power supply with the voltage and frequency indicated on the type plate using the supplied power adaptor. The power adaptor of the unit must be easily accessible so that the device can be disconnected from the mains at any time. When unplugging the power adaptor from the mains, pull at the adaptor body and not at the cable.
Lay the connecting cable so that it cannot be damaged. The connecting cable may not be kinked or laid over sharp edges, stood on or exposed to chemicals; the latter also applies to the unit as a whole. A power adaptor with damaged insulation can cause electric shocks and poses a fire risk.

Supervision
Do not allow children to use the device without supervision or to play in the immediate vicinity of the device. The device could tip over, be pushed off or pulled down from the stand surface and injure someone. Do not allow the switched-on device to run unattended.

Air circulation and high temperatures
Ensure that there is at least 3 cm free space on the sides and above the set for air circulation, if the set is placed in a cabinet or on a shelf.
Like any electronic device, your unit requires air for cooling. Obstruction of the air circulation can cause fires.
Prevent metal items, needles, paper clips, liquids, wax, or similar items, from getting into the interior of the device through the openings of the device covers. Such objects can cause short circuits in the unit, which could possibly cause a fire.
If something should get into the interior of the set then immediately unplug the mains plug of the device and contact the field service for more information.

Set-up
Place the unit on an even, firm, horizontal surface. Particularly ensure that the set does not protrude to the front when placed in or on pieces of furniture.
Set up the device where it is not exposed to direct sunlight and where it is not exposed to additional heating by radiators.

Volume
Loud music can lead to ear damage. Avoid extreme volume especially over long periods.

Thunder storms
In the event of a thunderstorm, pull out the mains plug and all connected cables from the device. Overvoltage caused by lightning strokes can damage the device via the mains. The mains plug and all connected cables should also be pulled out during long periods of absence.

Repairs and accessories


To rule out the danger of an electric shock, do not remove the cover. There are no parts inside the unit that can be repaired by the user. Have your device repaired or serviced by authorised technicians only. Only use original accessories, if possible.

Cleaning and care
Switch off the device with the main switch prior to cleaning.
Clean the device with a soft, moist, clean and colour-neutral cloth only, without any aggressive or scouring cleaning agents.

Control elements

1. Switch on/off to standby mode
2. LED indicator (power / charge state)
3. Bluetooth key
4. LED indicator (Bluetooth)
5. Key for handsfree talking
6. LED indicator (handsfree talking)
7. +/- Adjust the volume
8. LED indicator (volume/mute)
9. Microphone for handsfree talking
10. Connectivity Easy Pairing Antenna (for connection with NFC-enabled devices)
11. ON/OFF - Battery slide switch
12. 2V DC/2.0A - Socket for power adaptor
13. AUX IN - Stereo audio input 3.5mm jack
14. USB charge only - USB socket for charging external audio sources
15. Table Stand Flex - Listening angle adjustable by latching

Start-up

Charging the built-in battery

The battery in the device is already installed ex factory. Before the first use, the battery must be charged for about 3 hrs. With a fully charged battery the Speaker 2go is operational for about 8 hrs.
Insert the plug (S) into the socket at the rear side of the Speaker 2go.
Then plug the power adaptor (N) into a 110-240V 50/60Hz mains socket.

The battery charge level is shown by the LED indicator .

Switching on

	Set the slide switch to the ON position.
	Turn on the Speaker 2go using the key . The LED indicator lights up. During battery operation the battery capacity level is shown by the LED.
	Battery capacity more than 25%:	LED lights up white.
	Battery capacity 11% to 25%:	LED lights up red.
	Battery capacity 5% to 10%:	LED blinking red.
	Battery capacity is below 5%:	Speaker 2go switches off (safety buffer).

Switching off

	Switch the Speaker 2go to the standby mode using the key . The LED indicator goes off. After 10 minutes without audio playback or key operation, the Speaker 2go automatically switches to standby mode.
	When the speaker is not used for a longer time and before a transport, set the sliding switch to the OFF position.

Cable connection

Connecting the audio source via an audio cable

You can connect your Speaker 2go to your audio source, e.g. mobile phone, music player, etc., using an audio cable with 3.5mm jack plug (included in the set of equipment supplied).
Use the audio cable (S) with 3.5mm jack plug to connect the analogue stereo audio output of your audio source (A) with the AUX IN stereo audio input of the Speaker 2go.

The audio signal is now replayed via the audio cable.

Charging the audio source

You may charge the battery of your audio source, e.g. a mobile phone, via your Speaker 2go. To do so, use an USB cable with type A jack plug (available from your dealer) suitable for your audio source.

Insert the type A plug of the USB cable into the USB socket USB charge only of the Speaker 2go. With power adapter, charging will take place independent on setting of sliding switch . Without power adapter, charging function is only activated with slid- ing switch at ON position. If the battery capacity of the Speaker 2go is below 25%, external devices will no longer be charged.

Bluetooth link

Linking the audio source via Bluetooth

You can link your Speaker 2go to an audio source, e.g. smartphone, tablet PC, etc. using a wireless Bluetooth connection. The audio sources must support the Bluetooth A2DP protocol.
The distance between your Speaker 2go and the audio source must be no more than 10m (line of sight).
Up to 5 audio sources can be memorized by the Speaker 2go via Bluetooth. However, only one active connection is possible at a time.

	Press the key on the Speaker 2go for a long period (approx. 3 sec). You hear a signal tone. The LED indicator (Bluetooth) will flash.
	Enable the Bluetooth function of your audio source. If necessary, get help from the instruction manual of your audio source. If necessary, confirm the Bluetooth Search function of the audio source. Now, Bluetooth devices will be searched near the audio source. Select Speaker 2go. If a code is requested, enter 0000. After the linking is completed you hear a signal tone. The LED indicator 4 lights up permanently; the Speaker 2go is now ready for audio playback. For some audio sources, the link must be explicitly enabled before music playback can be heard from the Speaker 2go.
	When switching the speaker 2go to standby using the key, the audio source will be delinked. After switching the Speaker 2go on again using the key, the Speaker 2go tries to link to the audio source. In this situation the LED (Bluetooth) pulses. After successful linking the LED will light up permanently.

Connectivity Easy Pairing Link

Linking the audio source via Connectivity Easy Pairing

It is very simple to link your Speaker 2go to your audio source, e.g. smartphone, tablet PC, etc., when using the Connectivity Easy Pairing function (linking with NFC-enabled devices). For this purpose, the audio source must support the NFC function.

Enable the NFC function and the Bluetooth function of your audio source. If necessary, get help from the instruction manual of your audio source. Hold your audio source (A) in the direction of the Connectivity Easy Pairing antenna of the Speaker 2go. If necessary, confirm the request of your audio source for linking to the Speaker 2go. After the linking is completed you hear a signal tone. The LED indicator (Bluetooth) lights up permanently. Now, the Speaker 2go is linked to your audio source via Bluetooth and is ready for audio playback. For some audio sources, the link must be explicitly enabled before music playback can be heard from the Speaker 2go.

Audio playback

The Speaker 2go must be linked via Bluetooth or Connectivity Easy Pairing or connected via audio cable to your audio source and turned on.
For playback, the following sequence applies: Handsfree operation prior to Bluetooth audio playback prior to wired playback. This means that playback of audio content via the audio cable is only possible when audio content is neither played back from a device linked via Bluetooth nor via the integrated handsfree equipment.

	Start the audio playback on your audio source. When using an audio cable connection adjust the volume of your audio source to a high level and select the desired volume on the Speaker 2go to avoid interfering noise.
	Adjust the volume on the Speaker 2go with the +/- keys . The volume can be adjusted in 24 steps which are represented visually by six LEDs of the LED indicator (volume). Pressing briefly the +/- key increases or decreases the volume by one step. When keeping the + or - key pressed you traverse the whole volume range. The maximum volume is indicated by two flashes of all six LEDs with full brightness. Loud music can lead to ear damage. Avoid extreme volume especially over long periods.
	Mute the Speaker 2go by pressing the + and - keys simultaneously. All six LEDs of the LED indicator (volume) flash with full brightness, all other LEDs are dimmed. By pressing the + or - key the muting is cancelled. The LED indicator shows the original volume again.

Handsfree function

The Speaker 2go must be switched on and linked via Bluetooth or Connectivity Easy Pairing to your mobile phone.
In case of an incoming call, a ring tone sounds. The LED indicator (handsfree talking) flashes. An audio playback will be paused in this case.

	Answer the incoming call by pressing the key on the speaker 2go or the cor- responding key on your mobile phone. The LED indicator lights up (handsfree talking). When speaking turn your face to the top of the Speaker 2go.
	Adjust the volume on the Speaker 2go with the +/- keys .
	Finish the telephone conversation by pressing again the key on the Speaker 2go or the corresponding key on your mobile phone. Loud ambient noise impairs the quality of the handsfree function. Make sure there is a quiet environment or abstain from using the handsfree function if there is no proper environment. To achieve a high level of intelligibility between callers, speak only alternately. The distance between the caller and the Speaker 2go should be between 0.3m and 1.2m.

Table Stand Flex

The Table Stand Flex allows you to change the pitch of Speaker 2go and thus the angle of audio beam. For adapting the pitch, press the central top of Speaker 2go.

Adapting the pitch works on solid, plain surfaces only.

Legal details

Environmental protection

Cardboard box and packaging
In line with national regulations regarding the disposal of packaging materials, we pay a fee to authorised recyclers who collect packaging from dealers. Nevertheless, we recommend that you keep the original cardboard box and the rest of the packaging materials so that the device can, if necessary, be transported under the safest possible conditions.

The device

Attention: The EU Directive 2002/96/EC governs the proper return, handling and recycling of used electronic appliances. Old electronic devices must therefore be disposed of separately. Never dispose of this device in normal domestic waste! You can hand in your old unit free of charge at identified collection points or to your dealer if you buy a similar new unit.
Other details about return (also for non-EU countries) are available from your local authorities.
Before disposing of the device, please remove to the two built-in batteries and dispose of them separately.
To open the device, use a pointed object with which you lever out the grille on the rear panel, remove the two batteries and disconnect the cables.

Batteries

The built-in battery does not contain any pollutants such as cadmium, lead, or mercury.
In accordance with the Battery Directive, used batteries should no longer be disposed of in the domestic waste. You can dispose of used batteries free of charge at the collection points in retail outlets. Your dealer will also have a collection point for used batteries.

Battery

The rechargeable batteries are consumables and therefore not covered by the warranty. Customers are not allowed to replace defective rechargeable batteries. In case of a defective rechargeable battery please contact your dealer.

Danger of explosion if Li-polymer battery is incorrectly replaced (reverse polarity / short circuit). Replace rechargeable battery only with the same or equivalent type.

Legal information

"© 2012 CSR plc and its group companies.
The aptX® mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions."

Conformity / Manufacturer's declaration

Loewe Technologies hereby declares that this product meets the essential requirements and other relevant provisions of Directive 1999/5/EC and all applicable EU directives.
You can find the complete declaration of conformity in the product selection at: www.loewe.tv/int/my-loewe