Carbide 3D BitRunner V2 Quick Start Manual page 8

1.6 Attach the Grounding Cable to the Spindle Mount (Optional)
NOTE: We recommend using the included grounding cable to ground the spindle/router in case of
static discharge or electromagnetic interference (EMI). We especially recommend grounding the
spindle during the winter, or in very dry or EMI-noise-heavy environments.
To attach the grounding cable:
1. Insert the banana plug into the round port on the top of the BitRunner V2. See Figure 6.
Figure 6
support@carbide3d.com docs.carbide3d.com
08/19/2021 v1.0
8