Electrical Connection - FireplaceXtrordinair 4237 EG Installation Manual

20

Electrical Connection


The electrical line must be connected to the wires inside the junction box (hot, common, and 2 ground
wires) by a qualified installer or electrician and must meet all local codes.

Make sure the household breaker is shut off prior to working on any electrical lines.

The appliance, when installed, must be electrically grounded in accordance with local codes or, in the
absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical
Code, CSA C22.1.

The electrical line must be a min. 14 gauge, and supply 120 Volts, 60 Hz (typical max amps: 5).

Route the electrical connection through the ZC cover plate and junction box cover plate and attach to
the hookup wires pictured below.
Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause
improper and dangerous operation.
© Travis Industries
Installation
9/22/2021 - 1561
(for qualified installers only)
4237 EG