Fujitsu 770Tx User Manual page 83

S e c t i o n T h r e e
Table 3-5 Fields, Options and Defaults for the I/O Device Configuration Submenu of the Advanced Menu
Menu Field Options
Serial Port A: Disabled;Enabled; Auto.
Base I/O address: 3F8; 2F8; 3E8;2E8.
Interrupt: IRQ 3; IRQ 4;
IRQ 10; IRQ 11.
Serial Port B: Disabled; Enabled; Auto.
Mode: IrDA; FIR.
Base I/O address: 3F8;2F8; 3E8;2E8.
72
Default Description
[Enabled] Configures the serial port A using either no configuration
(Disabled),a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
[3F8] Allows user to set the serial port base I/O address when port
A is Enabled.
[IRQ 4] Allows user to set the serial port interrupt when port A
is Enabled.
[Enabled] Configures the serial port A using either no configuration
(Disabled),a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
[FIR] Allows user to set the se rial port mode when port B is Enabled.
[2E8] Allows user to set the serial port base I/O address when p ort B
is Enabled.