Fujitsu 770Tx User Manual page 124

tion and other parameters about the space
and the hard drive.
To remove all space allocation for the Save-to-
Disk function, do the following:
1.Go to the Start Menu and select MS-DOS
Prompt.
2. Type CD C:\Fujitsu
3. Type PHDISK /DELETE /FILE .
4. Press the Enter key.
The utility will remove the space allocation for
the Save-to-Disk function and free that space
for other use.
To create a space allocation for the Save-to-
Disk function, do the following:
1. Restart your notebook in MS-DOS mode.
2. Type CD C:\Fujitsu
3. At the DOS prompt type
PHDISK /CREATE /FILE
4. Press the Enter key.
C o n f i g u r i n g Y o u r L i f e B o o k 7 0 0 S e r i e s
5. The utility will create a Save-to-Disk file
called SAVE2DSK.BIN in the root directory.
It will be of the minimum size needed to
support the Save-to-Disk function with the
current memory configuration.
If you have had a read or w rite error when you
tried to perform a Save-to-Disk operation you
can re-allocate space to compensate for bad
blocks on your drive. To do this:
1.Go to the MS-DOS prompt.
2. Type C D : \ F u j i t s u
3. Type PHDISK /REFORMAT /FILE
4. Press the Enter key.
5. The utility will re-create the Save-to-Disk file
called SAVE2DSK.BIN with the same usable
size and any bad blocks marked.
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
C A U T I O N
Never use PARTITION in place of FILE
with the PHDISK Utility or you will
reformat your internal hard drive and all
data, applications and operating system
will be destroyed.
113