Fujitsu 770Tx User Manual page 21

S e c t i o n O n e
C A U T I O N
The internal modem is not intended for
use with Digital PBX systems. Do not
connect the internal modem to a digital
PBX as it may cause serious damage to
the internal modem or your entire note-
book. Consult your PBX manufacturer's
documentation for details. Some hotels
have Digital PBX systems. Be sure to find
out BEFORE you connect your modem.
Docking Port
This port is for connection to an optional port
replicator or docking station. The connector
cover must be closed and the sliding panel fully
opened to reveal the docking port and the
RJ-11 jack when connecting a port replicator
or a docking station. (Figure 1-9.)
10
C A U T I O N
The cover – which closes over the ports
on the rear of the notebook – can be
damaged if it is left open when the
notebook is moved around.
Serial Port
The serial port allows you to connect serial
RS-232C devices, such as serial printers or
serial scanners. (This is also sometimes
referred to as a COM port.) (Figure 1-9.)
Parallel Port
The parallel port allows you to connect
parallel devices, such as a parallel printer
to your notebook. (This is also sometimes
referred to as a LPT port.) (Figure 1-9.)
External Monitor Port
This port allows you to connect an external
VGA or SVGA CRT monitor. (Figure 1-9.)
Infrared Port
The fast IrDA (4Mbps) compatible port
allows you to communicate with another IrDA
compatible infrared device without a cable.
(See page 47 for more information.)
(Figure 1-9.)
Tilt
Docking Alignment
Adjustment
Receptacle
Feet
Memory
Upgrade
Compartment
Multi-function Multi-function
Bay 2 Bay 1
Multi-function Bay 2
Release Button
Figure 1-10 LifeBook 700 Series Bottom
Docking Alignment
Receptacle
Main Unit
and
Configuration
Label
Multi-function Bay 1
Release Button