Fujitsu 735Dx User Manual page 69

S e c t i o n T h r e e
Table 3-2 Fields, Options and Defaults for the IDE Adapter Submenu
Menu Field Options
Autotype Fixed Disk: [Press Enter]
Type: Auto; None;CD; User;
1-14; Rsvr; 16-39
Cylinders: (Available to A number between 0
change only when and 65,535.
Type = User. Displayed
for Type = Auto when a
hard drive has been detected
and Type = any number.)
60
Default Description
Selecting this field activates your notebook to search for
indentification of the drive,if any, which is installed on this
interface and determine its characteristics which are then
displayed and are not available to change without resetting
the Type.
Auto Allows you to configure the interface for almost any drive.
C A U T I O N
Even if the item help on the right side of the screen sug-
gests that when User is selected that the None selection
for Write Precomp: can be chosen by pressing the N key.
You must use the normal selection method explained in
Navigating Through the Setup Utility on page 55.
Sets the number of cylinders for the drive. This field can be
changed by incrementing (pressing the Spacebar) or by typing in
the number.