Fujitsu 735Dx User Manual page 119

S e c t i o n F o u r
C A U T I O N
The memory upgrade module can
be severely damaged by electro-static
discharge (ESD). Be sure you are properly
grounded when handling and removing
the module.
Checking the Computer Recognition
of New Memory Capacity
When you have changed system memory capac-
ity by adding or removing a memory upgrade
module, be sure to check that your notebook
has recognized all of the memory. You can
check memory capacity by looking at the Main
menu of the setup utility:
1. Turn on power using the power switch.
2.Enter the setup utility by pressing the F2 key
as soon as the Fujitsu logo appears on the
screen. (See pages 53-54.)
110
3. The System Memory and the Extended
Memory capacity, as detected by your note-
book during the Power On Self Test (POST),
are displayed at the bottom of the Main
menu screen.
Example:A system with 32MB of memory
will display 640K System Memory, 31M
Extended Memory.
When you have installed additional memory,
the display should change. For example for:
LANdock unit
Leveling
Alignment Foot
Docking Alignment Pins
Total RAM System
Installed Memory
16MB 640 K
24MB 640K
32MB 640 K
48 MB 640 K
64 MB 640 K
96 MB 640 K
Docking Connector
Telephone Connector
Alignment Notches
Figure 4-13 LANdock Front View
Extended
Memory
15M
23.5M
31.7M
48.5M
64M
97M
Docked LED
Ready to Undock LED
Undock Request Button
Docking Release Lever