Fujitsu 735Dx User Manual page 133

Problem
Modem Problems
Messages about modem operation.
Parallel, Serial,and USB Device Problems
You have installed a parallel-p ort device,
a serial-port device or a USB device.
Your notebook does not recognize the device,
or the device does not seem to work properly.
T r o u b l e s h o o t i n g
Possible Cause
2. You have a memory failure.
1. Messages about modem operation are
generated by whichever modem application
is in use.
1. The device is not properly installed.
2. The device may have been installed with an
application running and your notebook
doesn't know it's there.
3. Your software may not have the correct
software driver active.
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
Possible Solution
2. Make sure display of error messages is
enabled (see Boot Options Submenu on
pages 56-57),and check for Power On Self
Test (POST) messages. (See pages 138-140
for possible messages and their meanings.)
1. See your application software documenta-
tion for additional information.
1. Remove and re-install the device.
(See Parallel Port Devices on page 105,
Serial Port on Devices on page 105, or USB
Devices on page 105.)
2. Close your application and restart
your notebook.
3. See your software documentation and
activate the correct driver.
125