Fujitsu 735Dx User Manual page 113

S e c t i o n F o u r
Installing PC Cards in Your Notebook
PC cards are install ed in the PC Ca rd slot in the
l eft side panel of your noteboo k . Some PC Ca rd s
wi ll not work wh en all po s s i ble devi ces are
en a bl ed . If a PC Ca rd is not recogn i zed , you wi ll
n eed to open the Con trol panel , the Sys tem fo l d-
er, and then the Devi ce Ma n a ger, and ch oose a
devi ce to disable so that the re s o u rces can be
u s ed by the PC Ca rd .
C A U T I O N
Do not insert a PC Card into a slot if there
is water or any other substance on the
card; you may permanently damage the
card, your notebook, or both.
To install a PC Card:
1. See your PC Card manual for instructions on
installation of that specific card.
104
2. Make sure that there is not already a PC Card
in the slot. If there is, eject it, as described in
Removing PC Cards.
3. Insert the PC Card in the card slot, with the
product name label facing up. (Figure 4-9.)
C A U T I O N
Some PC Cards can only be installed or
removed with the power in Suspend
mode, some only with power Off.
Please check the card documentation
for correct usage.
C A U T I O N
Installing or removing a card while your
notebook is in the process of going
through the power on or power off
sequence may damage the card and/or
your notebook.
4. When the PC Card is fully inserted,the eject
button will pop out.
5.Flip this button toward the front of your
notebook to fold it out of the way.
6. When the card is installed,lock it in place
by sliding the Lock button toward the front
of your notebook. (Figure 4-9.)
C A U T I O N
Windows 95 has a shutdown procedure
for PC Cards that must be followed
before beginning to remove a card.
Removing PC Cards
If you wish to remove or replace the PC Card,
use the following procedure:
1.Shutdown operation of the card.
2. Click on the PC Card indicator on the
Windows taskbar.